DESCRIPTION |
DRAWING |
QUANTITY TO USE |
| Terminal Posts
(End, Corner and Gate Posts) |

|
As required ( 2 for each Gate) |
| Line Posts
(Intermediate Posts) |

|
See Line Spacing Chart |
| Tension Band |

|
For each end post use 3 for 3', 3 1/2' and 4'. 4
each for 5' and 6'. Same for gate posts. Double the quantity for corner posts. |
| Brace Band |

|
1 for each rail end. |
| 5/16" X 1 1/4" Carriage Bolt |

|
1 for each brace band, 1 for each tension bar. |
| Post Cap |

|
1 for each terminal post. |
| Eye Top |

|
1 for each line post. |
| Top Rail |

|
Same lineal footage as fence fabric. |
| Rail End |

|
1 for each end post. 1 for each gate post. 2 for
each corner post. |
| Top Rail Sleeve |

|
1 for each length of plain end top rail. Not
needed for swedged end top rail. |
| Tension Bar |

|
1 for each end post. 1 for each gate post. 2 for
each corner post. |
| Fence Fabric |

|
Same lineal footage of fence less gate openings. |
| Tie Wires |

|
1 for every 24" of top rail and 1 for every
12" of line posts. |
| Double Drive Gate |

|
As required. |
| Single Walk Gate |

|
As required. |
| Post Hinge (Male Hinge) |

|
2 for single walk gate. 4 for double drive gate. |
| 3/8" X 3" Carriage Bolt |

|
1 for each post hinge. |
| Gate Hinge (Female Hinge) |

|
2 for single walk gate. 4 for double drive gate. |
| 3/8" X 1 3/4" Carriage Bolt |

|
1 for each frame hinge |
| Fork Latch |

|
1 for each walk gate. |